Products and Services Hamakyu

Semitron® 490HR PEEK

Semitron® ESd 490HR PEEK electrostatic dissipative shapes that exhibit a higher resistivity value in the 10^9 to 10^11 ohms per square range. Semitron® ESd 490HR PEEK components are thermally stable to temperatures of 490° F / 270° C without degradation, and also possess high structural strength and stiffness combined with excellent dimensional stability. This particular grade is non-sloughing, which is why it is an ideal solution for socket, nest, and contactor manufacturing for test equipment, and other electronic device handling applications.

Ketron® CM GF30 PEEK

Ketron® GF30 Polyetheretherketone PEEK is a compression molded, 30% glass fiber reinforced grade with excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. With the addition of glass fibers, Ketron® GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron® GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300°F / 150°C.

Ketron® Sterra™ HPV PEEK

Ketron® Sterra™ HPV shapes are carbon fiber reinforced, with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® Sterra™ HPV PEEK’s combination of low wear, low friction, and high limiting pressure velocity, this PEEK material is often chosen as a solution for high speed service bearings, bushings, insulators, valves, and seals.

As part of the Sterra™ product portfolio, Ketron® Sterra™ HPV contains recycled content and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ketron® 1000 PEEK SP

Ketron® 1000 Polyetheretherketone PEEK FG (Food Grade) is a EU 10/2011 and FDA Compliant, unfilled general purpose grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron® 1000 PEEK FG shapes are known for their ability to fit within a variety of applications and industries.

Semitron® ESd HPV PEEK

Semitron® ESd HPV PEEK electrostatic dissipative shapes contain specific additives that make it an excellent performer in wear and friction applications where antistatic properties are essential. Due to this, this grade excels in electronic fixture applications that require a high degree of dimensional stability over an extended thermal range, as well as precise machinability. Semitron® ESd HPV PEEK is ideal for chip trays and carriers, PCB board manufacturing, and fixturing for electronic assemblies.

Ketron® GF30 PEEK

Ketron® GF30 Polyetheretherketone PEEK is an extruded, 30% glass fiber reinforced grade with excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. With the addition of glass fibers, Ketron® GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron® GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300°F / 150°C.

Ketron® CA30 PEEK SP

Ketron® CA30 PEEK SP is a 30% carbon fiber reinforced grade that combines high stiffness, mechanical strength, and creep resistance, with optimum wear resistance. This grade provides more thermal conductivity than unreinforced PEEK, increasing heat dissipation from bearing surfaces and improving bearing life and pressure-velocity capabilities.

Ketron® Sterra™ CA30 PEEK

Ketron® Sterra™ CA30 is a 30% carbon fiber-reinforced PEEK grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks. For details, please refer to the respective environmental data sheet.

Ketron® GF30 PEEK SP

Ketron® GF30 PEEK SP 30% glass fiber reinforced grade and offers higher stiffness and creep resistance than Ketron® 1000 PEEK SP and has better dimensional stability. This grade is appropriate for structural applications carrying high static loads for long periods of time at elevated temperatures. Ketron® GF30 PEEK SP is suitable for sliding parts but should be carefully examined as the glass fibers tend to abrade the mating surface.

Ketron® CA30 PEEK

Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Semitron® MDS 100 PEEK

Semitron® MDS 100 is a modified PEEK with a remarkable combination of strength, stiffness, and stability. This particular grade was developed for use in uncontrolled application environments where a high level of precision is required. Due to this, Semitron® MDS 100 components are often used as test sockets, nests, and fixtures in test and package equipment throughout the semiconductor and electronics industry.

Ketron® LSG CA30 PEEK

Ketron® LSG CA30 PEEK (Life Science Grade) stock shapes are made from 30% carbon fiber reinforced PEEK resin, pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993.

Ketron® LSG CA30 PEEK shapes exhibit exceptional stiffness, mechanical strength, and dimensional stability, as well as optimal resistance to wear and creep.

The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma, and gamma- and X-ray irradiation. These attributes make this material an excellent candidate for applications in the medical and bioprocessing fields, such as nailing target devices, grips, adapters, and washers.

Ketron® LSG PEEK-CLASSIX™ (white)

Ketron® LSG PEEK-CLASSIX™ (white) are Life Science Grade stock shapes made from Invibio PEEK-CLASSIX™ resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 30 days contact with body and tissue according to USP VI and ISO 10993.

With a unique combination of mechanical properties, chemical resistance, sterilization resistance, and white color, Ketron® LSG PEEK-CLASSIX™ (white) components can be used in a variety of applications in the medical and dental industries involving body contact for a duration up to 30 days. Used primarily as temporary dental abutments, these shapes are also great candidates for applications such as air and drug delivery systems and blood management components.

Ketron® 1000 PEEK

Ketron® 1000 Polyetheretherketone PEEK is an unfilled, general purpose grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron® 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Ketron® VMX Food Grade PEEK

Ketron™ VMX FG PEEK (Food Grade) is an EU 10/2011 and compositional FDA 21 CFR § 177.2415 compliant material that offers extreme dimensional stability and high strength and temperature resistance. Visual, metal and x-ray detectable, Ketron™ VMX FG shapes can be easily traced by conventional metal and x-ray detection systems, allowing global food processors to safely avoid costly recalls caused by foreign contamination. Due to their superior resistance to wear and corrosion, Ketron™ VMX FG PEEK components are favored for applications in the food processing and packaging industry such as pistons, manifolds, valves and mixing vessels.

Ketron® LSG FG PEEK

Ketron® LSG FG PEEK (Life Science- & Food Grade) stock shapes are made from unfilled PEEK resin that is pre-assessed for biocompatibility. The stock shapes are also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for use in wetted contact applications in bioprocessing. Standard food approvals include the FDA 21 CFR § 177.2415, while this specific FG type has the EU 10/2011 Food Grade as an extra feature.

Ketron® LSG FG PEEK (Life Science Grade) shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma, and gamma- & X-ray irradiation. The additional food grade compliance (based on food-related migration tests) makes this material an excellent candidate for applications in the bioprocessing fields, such as manifolds, valves, connectors, lids, and adapters.

Ketron® 1000 PEEK AE

Ketron® 1000 is an unfilled PEEK developed for general purposes in the aerospace industry. This grade offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron® 1000 PEEK AE shapes are known for their ability to fit within a variety of applications and industries.

Ketron® Sterra™ 1000 PEEK

Ketron® Sterra™ 1000 Polyetheretherketone PEEK is an unfilled, general purpose grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron® Sterra™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

As part of the Sterra™ product portfolio, Ketron® Sterra™ 1000 PEEK contains recycled content and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ketron® 1000 IM PEEK

Ketron® 1000 Injection Molded (IM) Polyetheretherketone PEEK shapes offer excellent chemical, corrosion, and wear resistance across a wide range of operating temperatures. Ideal for applications within the oil and gas industry, Ketron® 1000 IM PEEK components are often specified for backup seal rings and v-seals. In addition to the widely used Ketron 1000 PEEK grade, several specific grades are available that incorporate glass or carbon fibers, or wear resistant additives that increase the wear life of machined parts. It is easily machined and has unrivaled chemical resistance compared to all other advanced engineering materials. 30% glass fiber filled and 30% carbon fiber filled grades are available

Ketron® HPV PEEK SP

Ketron® HPV PEEK SP bearing grade is reinforced with carbon fiber, graphite, and PTFE lubricants. With the lowest coefficient of friction and the best machinability for all PEEK grades, it is an excellent combination of low friction, low wear, high LPV, low mating part wear, and easy machining. This makes it ideal for aggressive service bearings, bushings, rollers, and thrust washers.

Ketron® LSG PEEK

Ketron® LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing.

Ketron® LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma, and gamma- & X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids, and adapters.

Ketron® 1000 PEEK FG

Ketron® 1000 Polyetheretherketone PEEK FG (Food Grade) is a EU 10/2011 and FDA Compliant, unfilled general purpose grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron® 1000 PEEK FG shapes are known for their ability to fit within a variety of applications and industries.

Ketron® HPV PEEK

Ketron® HPV Polyetheretherketone PEEK shapes are carbon fiber reinforced, with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® HPV PEEK’s combination of low wear and friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals.

Ketron® CM CA30 PEEK

Ketron® CM CA30 PEEK is a compression molded, 30% carbon fiber-reinforced polyetherether ketone that exhibits outstanding impact, corrosion, chemical, and wear resistance. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® CM CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. Ketron® CM CA30 PEEK shapes also excel in large parts applications, where high strength and stiffness are required.

Ketron® TX PEEK FG

Ketron® TX Polyetheretherketone PEEK FG (Food Grade) is an internally lubricated, EU 10/2011 and FDA Compliant grade that offers improved wear and frictional performance over virgin PEEK. Often favored for food and beverage processing, and pharmaceutical applications where extreme performance temperatures, critical tolerances, or low frictional heat are required, Ketron® TX PEEK FG components extend wear and part life by lowering the coefficient of friction over standard PEEK.

Ketron® CM HPV PEEK

Ketron® CM HPV is a range of compression molded and carbon fiber reinforced PEEK shapes containing graphite and PTFE lubricants. This premium PEEK grade has the lowest coefficient of friction and the best machinability of all PEEK materials. Ketron® CM HPV exhibits a combination of excellent wear properties and a high limiting pressure velocity, making this material an ideal solution for demanding service bearings, bushings, insulators, valves, and seals.

Semitron® ESd 480 PEEK

Semitron® ESd 480 is an electrostatic dissipative PEEK that exhibits excellent chemical resistance properties while also maintaining high dimensional stability under varying environmental conditions. Due to these characteristics, this grade in particular is ideal for critical test fixture and wafer handling applications in wet process tools, where static dissipation is critical.

What are you searching ?