Polyamide (PA)
Obviously plastic absorbs water, but different types of plastic absorb more or less. This water absorption will change the properties and volume of the plastic, reducing its performance. In general, among the PA, POM, PET, PC plastic lines, the PA line absorbs the most water, the absorption drops sharply in POM, PET, PC...
HDPE
At a temperature of 23oC/50% RH, when placed in air, PA (Polyamide) has a hydrating capacity of 1.7-2.8%; At a temperature of 23oC, when immersed in water, the saturation of PA fluctuates from 5.5% (Ertalon 66 - GF30) to 9.5% (Ertalon 4.6), which will cause unwanted volume changes. Therefore, PA is often used for parts that have little contact with water such as bearings of mechanical parts, gears, cams, and bolt parts. PA with many self-lubricating variants such as Ertalon LFX, Ertalon NSM, Nylatron LFG, Nylatron 703 XL used for internal parts. Ertalon 6 PLA or Nylatron LFG is safe in contact with food.
Polycarbonate (PC)
Compared to PA plastic. Pom (Polyacetal) plastic has outstanding waterproof properties, it is only absorbed 0.8% (for Pom C, Pom H) and 0.72% for Ertacetal H-TF in 23oC water environment. Low water absorption makes Ertacetal always dimensionally stable, it is suitable for making racks and molds, heavy duty belts, gears, rails, cushions, electronic components, pumps, furniture automobiles, textile machine parts, conveyor screws, factory components, electrical insulation parts, machinery for food processing plants (according to FDA, EU Food & 3A Dairy Compliant standards).
Ertalyte (Polyethylene Terephthalate) PET
Ertalyte's water absorption rate in 23oC water environment is only 0.5%, Ertalyte TX is 0.47%. This ratio in PC1000 is 0.4%, which is a low level demonstrating dimensional stability and application in many fields with water contact such as ice production, water filtration, packaging, and containers. water, food storage, exterior...
![](/web/image/13428-6c77e637/1.jpg?access_token=63346df2-b068-41b0-833d-5102aca82a5b)